Today Hibo Laser summarizes several major indicators for buying laser cutting. I hope to help everyone:
1. Consumer customers' own product needs
First, we must figure out the scope of production, processing materials, and cutting of their enterprises to determine the models, sides, and quantities of the equipment to be purchased and make a simple way to pave the way for the later procurement work. The application of laser cutting machines involves mobile phones, computers, sheet metal processing, metal processing, electronics, printing, packaging, leather, clothing, industrial fabrics, advertising, crafts, furniture, decoration, medical equipment, and many other industries.
Second, the function of laser cutting machine
Professionals conduct on-site simulation solutions or provide solutions, and they can also use their materials to go to the manufacturer to prove.
1. Deformation of the material: the deformation of the material is minimal
2. Cutting seam thin: The cutting of laser cutting is generally 0.10mm-0.20mm;
3. Smooth cutting surface: The laser cutting cut surface has hairless thorns; generally, the YAG laser cutting machine is a bit burr, mainly determined by the cut thickness and the use of gas. Generally, there are no burrs below 3mm. The gas is good at nitrogen, the oxygen effect is second, and the air effect is the worst.
4. The power size: For example, most of the factory is metal plates cutting less than 6mm, and there is no need to buy high-power laser cutting machines. If the production volume is large, buy two or more small and medium-power laser cutting machines. In this way, the cost of controlling control is helpful for manufacturers.
5. Core part of laser cutting: laser and laser head are imported or domestically produced. There are more IPGs used in imported lasers. At the same time, other accessories of laser cutting should also be noted. If the motor is an imported servo motor, Directions, beds, etc., they affect the cutting accuracy of the machine to a certain extent.
6.
One thing to pay attention to is the cooling system of the laser cutting machine -the cooling cabinet. Many companies directly use the air conditioners to cool it. Everyone is clear. It isn't good. A good way is to use industrial air conditioners to achieve good results.
Third. After-sales service of laser cutting machine manufacturers
Any device will cause varying degrees of damage during use, so maintenance and charging will be considered promptly after injury. Therefore, when buying, you need to understand the after-sales service of the enterprise through various channels, such as whether the maintenance charges are reasonable.
From the above, we can see that the selection of laser cutting machine brands now focuses on "quality of quality" products. Companies that can go further are those manufacturers who can do technical, quality, and service. Essence
